Guangzhou Ruihe New Material Technology Co., Ltd
FOR SUPERIOR QUALITY, FOR INNOVATION
Add to Cart
Two Parts Medical Grade Liquid Silicone Rubber Suitable for Silicone Tooth, Medical Product
Description
This RH 6250-40YH can be used for:
1) Make soft products, like sex toys, sex dolls, body organs
2) Body breast enhancers, bra pads
3) Shoulder pads, paster, patches, antislip mat
4) Human body shape, simulate robots, simulate props
5) Simulate people, prostheses, masks
Typical Properties
| RH 6250 - 40 YH | |||
| Properties | Unit | A | B |
| Appearance | / | transparent | transparent |
| Viscosity | mPa.s | 1400000-2000000 | |
| Density | g/cm3 | 1.10±0.02 | |
| Shore A Hardness | A/JLS | 40±3 | |
| Tensile Strength | MPa | ≥7.5 | |
| Elongation at break | % | ≥550 | |
| Tear Strength | KN/m | ≥20 | |
| Linear Shrinkage | % | ≤0.1 | |
| Tensile set | % | ≥1.7 | |
| Rebound | % | ≥55 | |
| Compression set | (22 hrs at 175℃) % | ≤35 | |
These figures are for reference only, please contact us for details.
Typical properties of the vulcanisate:
The mixing ratio of components A: B = 1: 1.
Production Process
1. Add raw material
2. Stir and mix
3. Sampling inspection (Viscosity detection, Hardness test, Tear resistance)
4. Mass production
5. Label
6. Packing
7. Transport
Certificate
Rui-He RH6250-40YH liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ETC.
Packaging & Storage
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
FAQ
Q: In what colors is silicone available?
A: Silicone can be supplied in a very wide range of colors, including fluorescents, metallics, and even those that change color with heat!
Q: What equipment do I require to process silicone compound?
A: Silicone rubber compounds can, in general, be processed on conventional rubber processing machinery.
Q: Does the silicone mold get burnt out?
A: Our silicone rubber has added a special material which can increase its resistance to high temperature. However, it gets heat when added the curing agent. You ought to demold the product within 3 minutes to avoid this problem.
Q: What’s your MOQ?
A: 500KG.
Q: How long will I get replies?
A: Due to time difference and holidays, we will try our best to reply to you in 24 working hours. If there is anything we can do to help, please feel free to contact us at any time.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.