Guangzhou Ruihe New Material Technology Co., Ltd
FOR SUPERIOR QUALITY, FOR INNOVATION
Add to Cart
Baby Feeder Spoon and Nipples Liquid Silicone Rubber Food Grade LSR
Rui-He silicone rubber RH 6250-50-2 Product Description
High Transparet Liquid Silicone Rubber To Make Baby Nipples Silicone Sealants For Breast Pump
RUI-HE 6250-50-2 is a kind of two-component liquid silicone rubber for injection molding processes, consisted of part A and part B.
Liquid silicone rubber has a lower shrinkage, higher temperature resistance and it is food grade.
Liquid Silicone Rubber possesses natural transparency, this attribute makes it possible to produce, colorful, custom, molded products.
LSR is platinum cured (vulcanized) materials which are mixed in a 1: 1 ratio by weight.
Typical Properties: Food Grade Silicone rubber for baby products
| RH6250-50-2 | |||
| Properties | Unit | A | B |
| Appearance | / | transparent | transparent |
| Density | g/cm3 | 1.02 ± 0.02 | |
| Shore A Hardness | A/JLS | 50 ± 2 | |
| Tensile Strength | MPa | ≥ 9.0 | |
| Elongation at break | % | ≥ 500 | |
| Tear Strength | KN/m | ≥ 35 | |
| Linear Shrinkage | % | ≤ 0.1 | |
| Tensile set | % | ≥ 0.8 | |
| Rebound | % | ≥ 50 | |
These figures are for reference only, please contact us for details.
The mixing ratio of components A: B = 1: 1.
Vulcanization: 150 °C / 5 min
Applications : LSR silicone rubber injection produce
Why do you choose RH 6250-50
Certificate
Rui-He RH6250-50 Liquid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2015, etc.
Packaging & Storage
| Packaging Details | This kind of rubber is packed in 20kg/plastic barrels or 200KG/iron drum with an inside plastic bag. | |
| Storage | Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture. | |
| Port | HUANGPU GUANGZHOU | |
| Lead Time | 1 – 1000 (Kilograms) 1001 – 10000 (Kilograms) | 7 days 15 days |
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
FAQ
Q: Does silicone release PCBs during curing?
A: There is a possibility that certain compounds (usually those used for extrusion purposes) can evolve very low quantities of PCB''s.
These are derived from the peroxide used to cross-link the silicone. It is therefore wise to ensure that adequate ventilation and
extraction is provided in the areas where such compound is being processed.
Q: Can I thicken a silicone?
A: Silicone liquids can be thickened to a certain extent by the addition of silicas.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.